Standalone HV100 Transmitter
September 2013
.....die ersten Bilder des Serienreifen selbstständigen Dual Band DVB-T HV-100EH Senders 
Alle Daten mit Vorbehalt, ich selber habe diese Version noch nicht getestet, meine getestete Version ist Monoband
und bei Leiterplate bzw. Elektronik gibt's unterschiede, siehe viewtopic.php?f=7&t=410&start=30#p1110
All data with reserved, myself have not tested this version, my Version is Monoband and diferent electronic.
Laut HiDes:
Start to shipping in the beginning of next month (October), End user Price 560US$
Versand erste Geräte Anfang Oktober 2013 ----> Verkaufspreis 560US$
Frequenz range: 50MHz ~ 950MHz and 1200MHz ~ 1350MHz
TV Standard: DVB-T EN-300 744 HV-100D and ISDB-T ARIB STD-B31 HV-100I
Two Versions: HV-100D and HV-100I
Video compression: H.264 or MPEG2
Two Outputs: 75-Ω F-type connecter and two-wire terminal for twisted pairs (differential RF output)
Size: 19,5 x 12,5 x 4cm
Standalone Transmitter HV-100EH, new tests at a transmitter from continuous series production....
Independent transmitter HV-100E from ongoing series production.... Data is essentially the same as the first prototype viewtopic.php?f=7&t=410&start=30#p1110 there has only been some hardware changes.
There are currently 3 versions: HV100EH HV101E and HV102E, although only HV100EH is of interest to amateur radio operators and is being tested here.
Supports MPEG2 and H264, broadcast carriers 2k, 4k or 8k, QPSK 16QAM and 64QAM, all bandwidths from 1 to 8MHz, PAL and NTSC, CVBS and HDMI, variable output power, dual band 70cm and 23cm, large frequency range setting, HDMI broadcast monitor output, audio volume and quality Setting, according to HiDes, still expandable, etc...
HV-100 series has 99 channels and of them:
Ch0 is freely programmable via USB with all possible frequencies, bandwidths and other settings from the tool kit
Ch1 to Ch80 are hard-programmed frequencies according to television standards with bandwidths 6 ~ 8MHz from 142MHz to 946MHz
Ch81 to Ch99 are again freely programmable channels
CH0 is interesting for ATV radio amateurs, but the fixed channel is more interesting for professionals.
Switch between individual channels using the UP DOWN buttons and confirm with OK
Transmission power is consistent across all bandwidths, usable transmission power setting range from -2dB to +6dB in 23cm band and -12dB to +3dB (adjustable in tool kit) in the range 150 ~ 950MHz, measured output power with setting +3dB is 2.1mW on 436MHz and - 17dBm at 1260MHz (measured with HP478A measuring head), shoulder distance at different output powers can be seen in Scan1
Usable or adjustable transmission range (Ch0) in the lower band is from 60MHz to 950MHz and in the upper band from 1200MHz to 1350MHz.
Higher resolution, H264 mode from 3MHz bandwidth.
On the subject of network sockets, according to HiDes:
Network socket is currently not active for users, only intended for developers.
We will also develop software for:
1. Control
2. Network video streaming Inp/Out
......via this network socket.
Automatically detects whether a video signal is present at the input, if not present generates a WARNING page... Picture below
Operating voltage 9 to 24V, at 12V there is 0.52A power consumption.
Here are my setting parameters for HV100 and HV200 .......
July 2, 2014
Frequency transmission... controlled with two receivers.
Noticed: regardless of whether the video signal is 0.8Vpp or 1.2Vpp at the transmitter's video input, the HV100 brings it to the standard value of 1Vpp within a few seconds.
Kommentare
Kommentar veröffentlichen