Control panel for: HV320 and HV200

 Panel Control for HiDes standalone Transmitter

Allows setting of all important parameters without computer, on HiDes standalone transmiters ( important in portabel as contest, etc... )
Operating buttons are sufficiently long for mounting on the front panel of the housing.
Vcc : 5V
According to HiDes : HV320 ....YES Plug & Play
for HV-100, HV-200, the board need to rework to remove two resistors and connecting three wires to use it's UART interface.
HV-310, it needs to use a UART to RS232 adapter. ( LCM Control --> UART-to-RS232 --> HV-310 )

Panel Control ermöglicht Einstellung aller wichtiger Parameter ohne Computer, auf HiDes standalone Sender ( wichtig in portabel betrieb wie contest, usw... )
Bedientasten sind ausreichend lang für eine Montage an Gehäuse Frontplatte.
Betriebsspannung : 5V
Geeignet für: HV320 ...Plug & Play
HV100 und HV200 benötigen kleine Umbau ( am PCB entfernen 2 Wiederstände und 3 Drähte einlöten )

Display und Control board sind steckbar somit ist getrennte Montage auch möglich.
The display and the control board are pluggable so separate assembly is also possible.

Demnächst auf eBay USA http://stores.ebay.com/HiDes168?_rdc=1 erhältlich für 45,00 US$ + Versand
Europäische Kunden bezahlen 53,00 Euro Versand inclusive.... weitere Info: oe7dbh@tirol.com
Coming soon on eBay USA http://stores.ebay.com/HiDes168?_rdc=1 available for 45,00 US $ + shipping
European customers pay 53.00 Euro shipping inclusive .... more info: oe7dbh@tirol.com



--------------------Connect Panel Control with HV320 --------------------
Newst HV320 Software download here: https://www.dropbox.com/sh/v24cgkx8pg3p ... 2AWaa?dl=0 

Panel control works on the Ch00 instead of computer. All remote control and UP DOWN Buttons functions are retained.

I have my HV320 in another housing installed, with power supply and additional fan for better cooling. Panel control will by integrated in cover.

very simple change of all send parameters

Next one HV320 in original housing with Panel Control.....
Please Change data in Software , then Hardware.....

Set what you want

Auch mit angeschloßenen Panel Control ist möglich über Software und USB-UART Kabel Änderungen vorzunehmen ,
Äanderungen wie Sendername , samplingrate , usw.... Befehle die man eigentlich nur einmal einstellt und nie
wieder verändert. WICHTIG ist nur: nicht über Panel Control parallel etwas zu verändern solange HV320 mit Computer
verbunden ist.

-------------------- HV100 Serie and HV200 Serie + Panel Control ---------------------

A panel control is also available for HV100 / HV200 standalone transmitters....

Run AVSenderUARTGUI.exe to set UART 2 to 57600 

Hardware Change...... 

Soldering points are very small, fix wires, solder ,      very very carefully !!!.

Note:
.....after each "save" takes 14 seconds for reboot and change data.


Mauro IV3WSJ has also mounted a panel control on his HV100EH ....for more freedom of operation, especially in portable use.
Here..... viewtopic.php?f=7&t=410&start=405#p2478



Translated by google