Avanger-Octagon LNB with SMA port IN-OUT

 


LNB with SMA Input<->Output       and       PLL Quarz  Local Oscilator on 9,3887 GHz







We come in 10,400GHz area not less than 1.5 dB noise figure no matter SMA or waveguide version
( Avenger and Octagon ), with or without adjustment stab changing on first Mosfet.
Nine LNB tested in various combinations ( with stab, without stab, SMA , waveguide )
LNB gain does not change much but noise figure under 10,400GHz considerably.
0.1dB noise figure is a joke by the LNB manufacturer, first Mosfet itself has already 0,45dB ..... when finished LNB
can be expected minimum 0.6 dB at 11GHz ( was also measured 0,65dB & 11GHz).
There is no LNB with 0,1dB noise figure on market.
Nevertheless, this noise figure with 60cm offset antene is still good enough to receive EsHail satellite.
we do not receive so reflected weak signals from Mars
 ;)





Kommentare

Beliebte Posts aus diesem Blog

2400 MHz UPconverter BU500

2.4 GHz 30W TX UPlink for QO-100 with IF 50....1300MHz

10GHZ input - Down Converter 3LNC70 - 432MHz output